3DLACK Fixační sprej

Brand: 3DLac
€8 €9,70 incl. VAT
In Stock (>5 pcs)
Delivery to:
03/10/2022

Adhesive spray

This 3D lac odorless adhesive spray allows your 3D prints to properly hold the print cartridge of your 3D printer. The adhesion provided by the spray is durable and therefore does not need to be reapplied after each print.
3DLAC spray is available in 400 ml format.

Detailed information

Product detailed description

Its function is to hold the first plastic layer so that the start of printing is stable to prevent unwanted errors.
3DLAC is the perfect replacement for Kapton tape and other types of fixators due to cost savings and easy application.
The light 3DLAC mist above the surface is enough to completely attach the first layer of plastic to the base.
Thanks to the properties of 3DLAC, when the base is hot, the extruded plastic is firmly glued.
Once the printed piece has cooled, it can be removed smoothly and without damage.

- This spray is applied on a flat surface

- It is not necessary to apply this spray after each print

- follow usual precautions when handling (flammable products)

- Do not shake the spray to optimize performance before use

* ABS fiber and its composites, which are very sensitive to heat, tend to deform during printing, especially at the bottom of your items. Therefore, it is recommended to apply an adhesive spray to the perforated plate before starting 3D printing.

Additional parameters

Category: 3D Printers Accessories
Weight: 0.4 kg
Brand: 3DLac