Tiertime Filament Dryer

Product detailed description

Recommended drying time and temperature

Fiber types Temperature Time
PLA 55 ° C (131 ° F)> 3 h
ABS 65 ° C (149 ° F)> 3 hours
PETG 65 ° C (149 ° F)> 3 hours
Nylon 75 ° C (167 ° F)> 12 h
PVA 45 ° C (113 ° F)> 10 hours
TPU / TPE 55 ° C (131 ° F)> 4 h
ASA 65 ° C (149 ° F)> 4 hours
PP 55 ° C (131 ° F)> 6 h
HIPS 65 ° C (149 ° F)> 4 hours
PC 75 ° C (167 ° F)> 6 hours
PEEK 75 ° C (167 ° F)> 6 hours

These recommendations are made under the following conditions.
* Ambient humidity: 50% * Ambient temperature: 25 ° C * Spool with fiber 500 g * Original fiber

The actual drying time of the filaments varies depending on the fiber additives, the initial water content and the ambient temperature and humidity. If the filament has been exposed to air for several weeks, it is very likely to absorb a large amount of moisture and a much longer drying time is required (twice the normal drying time). In addition to drying the fiber before 3D printing, drying the fiber during printing is always recommended